How to Use:

1.  Prisoner may be secured in the KuFBag™ in front or in back.

2.  Pouch - Handcuffs are placed on the prisoner (black box is optional) and then inserted inside the 
     KuFBag™ securing the hands from grasping.  Prisoners' hands are inserted inside the KuFBag™ with the 
     Plastic Ties secured through the grommets and secured around each wrist of the prisoner being 
     transported.  Plastic Ties are placed through the grommets and inserted through the 1" webbing on the 
     back of the KuFBag prior to inserting the prisoners' hands.  Plastic Ties need not be secured too tight to 
     cut off circulation.  Trim the excess length off the Plastic Tie to prevent it from being used as a weapon.

3.  Wrist Straps - Secure straps around both wrists of the prisoners engaging the Velcro Hook and Loop 
     making sure that two components are interlocked.

4.  Buckle Strap - Pull the strap from back to front engaging the Velcro Hook and Loop making sure that 
     two components are interlocked.  Velcro Hook and Loop being pulled apart will will be a warning signal 
     to the transporting officer that the prisoner is attempting an escape.  Connect the Dual Locking 
     Buckle matching up the interlocking components, pushing them together until you hear the snap and 
     locking sound of the Buckle.  The vehicle seat belt may be inserted through the Buckle Strap for
     additional security.

5.  Leg Straps - Secure straps around both legs of the prisoners engaging the Velcro Hook and Loop 
     making sure that two components are interlocked.

6.  D-Rings (attached on back) - For inserting waist chains.


View PDF File Here